Applications
- Industrial Enclosure Linings
- Residential Enclosure Linings
- Enclosure Linings
- Door and Wall Insulators
- OEM Applications
- Apply with standard adhesives or PSA backing
WARNING: Urethane foam, when exposed to heat or ignition sources may burn. Once ignited, urethane foams can burn rapidly, consuming a high rate
of oxygen and releasing hazardous gases, toxic fumes and smoke. In an enclosed space, this may prove fatal. Consideration must be given to the flammability issue when using this product. Do not expose urethane foam to
an atmosphere that will contaminate it, nor to ignition or hear sources that may cause it to burn.
REFERRALS:
Solid State Controls, 875 Dearborn Dr., Columbus, OH 43085 Lee Fry; 1-614-846-7500
Dresser Rand, 100 Chemung St., Painted Post, NY 14870 Ron Bednarsky; 1-607-936-8383
Cameran Fabricating, 727 Blostein Blvd., Horseheads, NY 14845 Bill Andrews; 1-607-739-3606
PolarFab, 2800 East Old Shakopee Road, Bloomington, MN 55425 Al Boger; 1-952-876-3041
ABB Power, State Route 42, Bland, VA 24315 Frank Croft; 1-540-688-3325
Woodbridge Corp., 4240 Sherwoodtowne Blvd., Missisauga, Ontario L4Z2GS
Niro Donabedian; 1-905-896-3626
FBF Inc., 1145 Industrial Blvd, Southampton, PA 18966 Joe Medvig; 1-215-322-7110
Spartan Engineering, Old Route 50 West, Flora, IL 62839 Jim Legle; 1-618-662-2101
Acro Automation, 2900 Green Tree Road, Milwaukee, WI 53209 Bob Long; 1-414-352-4540
Mercruiser, 3003 North Perkins Road, Stillwater, OK 74075 Duane Needham; 1-405-743-5358
Alcoa, Park Avenue East, Massena, NY 13662, Rob Weykamp; 1-315-764-4750
Alf ab, 14020 Highway 57 North, Evansville, IN 47711 Hauge Neeley; 1-812-867-7960
Boise Cascade, Box 2139, Salem, OR 97308 Jerry Smotherman; 1-503-362-2421
Forster Manufacturing, Box 657, Wilton, ME 04294 Gerald Viens; 1-207-645-2574 x285
To Do:
- Check further Web site pages on any of those products for more information, application photos, spec sheets, color charts, and references
- Measure your room dimensions
- Contact NetWell
Product Description-These 4'x4' squares are layered with a 1/4" foam, then a 1/10" PVC vinyl, and finally a 1"
foam faced with a protective aluminized mylar skin. Ideal for enclosure linings where you need to both "block" sound from escaping and "absorb" noise trapped inside!