FBF1M Foam Panel Liner

_______________________________________________________________________________________

Description                                                                    Order Online Now!

FBF1M Panels are 4'x4' sound panels that measure 1.25" thick.   A thin mass loaded vinyl sound barrier membrane separates the 1/4" foam decoupler on the back side from the 1" sound absorption foam on the front side.   The layers are laminated together and finished with an aluminized mylar facing.    FBF1M panels are enclosure lining panels cut and pasted to the interior walls of a sound enclosure to isolate noise.    These enclosure panels block noise from bleeding out, decouple sound vibrations, and absorb sound trapped within the enclosure.

These panels are ideal for a cut/paste application on the interior walls of a new or existing shroud or enclosure built around your stationary sound source.    The mylar skin is standard, which helps protect the foam against moisture/oil mist, etc., and also serves to seal the foam to prevent foam dust from emitting out into the air.

This material can easily be cut with a scissors, and applied to the walls with a tube of silicone adhesive.    The panels are lined with dB-Bloc, so there is more weight here than a standard foam panel.   For adhering to ceilings of an enclosure, consider bracing the panels to the surface with a reinforcing strap or bar.

Pressure sensitive adhesives are available, but silicone adhesives work just as well, penetrating deeper into the pores of the foam, and making your order quicker to deliver and less expensive.